- Impact absorption
- Slip resistant
- This product ships from Arizona
- Durable in high traffic areas
- Rubber rolls for gyms
- Low VOC emission .5 mg/m2 or less
- Comfortable and anti fatigue
- Made in the USA
Made in the USA
Recycled Content
Leed Points
Reversible
Schools, Commercial Gyms, Weight Rooms, Fitness Centers, Home Gym
NOTE: This item is a custom order and is not returnable.
Also available in three-color options, it’s easy to create your own custom-made project while keeping your project on time and on budget. Delivers comfort for home, commercial fitness centers, school weight rooms, or health clubs. The 8 mm thick roll works for weight rooms that are not using huge barbells and large amounts of weight.
Test Data:
Shore hardness: D-2240 – 60+/-5
Density: D-792 – 60 lbs./cu. ft.
Elongation (at break): D-412 – 85 – 125%
Tensile strength: D-412 – 250 psi
Taber abrasion: D-501 – .45
Flame spread: E-84 – 135
Smoke density: E-84 – less than 450
Compression set; D-395 – 12% or less
Coefficient of Friction: D-1984-95 – Wet 1.20/Dry 1.20
Tear: D-624 – 95 PPI – Die C
Thickness tolerance: +/- .020
Width tolerance: +/- 1/4 inch
Made in the USA from recycled rubber content.
This product ships from Arizona.
Custom cuts will be about 1 inch over the requested length.
A one component polyurethane-based adhesive is recommended for glue-down installations.
Rolls are ordered in by the square foot; minimum order length is 15 feet.
Disclaimer
ForceFit Athletic recycled black rubber products may contain flecks of white.
Maintenance
For regular cleaning damp mop with hot water and a neutral Ph cleaner, such as Taski Profi.
Shipping
Ships via freight delivery, shrink wrapped on pallets.
| SKU# | ARC-8mmBlk-SF-AZW |
| In Stock | Yes |
| Product Type | Roll |
| Material Type | Rubber |
| Product Edging | Straight |
| Thickness | 8 mm |
| Width | 4.00 feet |
| Length | 1.00 feet |
| SF per Item | 1.00 |
| Weight | 1.85 lbs |
| Packaging | Shrink Wrapped on Pallets |
| Non Absorbent | Partial |
| Special Adhesives | Yes |
| Interlock Loss | 0.00 feet |
| Material Hardness | D-2240 65+/-5 |
| Interlocking Connections | No |
| Made In | United States |
| Surface Finish | Smooth |
| Surface Design | Solid color |
| Installation Method | Dry lay, tape, or glue down on hard, flat surface |
| UV Treated | No |
| Reversible | Yes |
| Border Strips Included | No |
| Flammability | ASTM E-84 – 135 |
| Smoke Density | ASTM E-84 – <450 |
| Static Test | ASTM F970-00 – -.001in. |
| LEED Points | Yes |
| Manufacturer Warranty | 1 year limited manufacturer |







































Reviews
There are no reviews yet.