AquaTile Aquatic Flooring 3/8 Inch x 2×2 Ft.

1. Increase safety with slip-resistant multi-directional texture
2. 1-foot fall height rating absorbs impact of falls
3. Experience comfort with soft EVA closed-cell foam material
4. UV stabilized for outdoor use to maintain color integrity
5. Use indoors or outdoors for aquatic areas
6. Resistant to chemicals
7. Choose from coordinating colors
8. Easy to clean

Use these tiles for various installations to accommodate projects of any size, including indoor or outdoor pool decks, water parks, splash pads, and health clubs. The AquaTile Aquatic Flooring 3/8 Inch x 2×2 Ft. product exceeds all safety inspections as defined by industry standards. The primary feature of this product is to provide a surface with as much or more friction as brushed concrete, as well as a reduction in the force of impact, specifically in the event of a fall.

The closed-cell foam tiles act as a cushion, dramatically decreasing the potential for injury as compared with traditional aquatic surfaces like concrete. Whether you, your child, or grandma are crawling, running, or jumping around the water, you can worry a little less knowing AquaTile is underfoot, providing extra friction and a soft landing.

Slip Resistant – Fall Protection Pool Area Flooring

AquaTiles have a multi-directional texture specifically engineered to reduce the risk of slips and falls. The added cushioning properties absorb the impact of inevitable falls, improving the interactive play experience. AquaTiles impact attenuation has been independently certified and exceeds industry standards, rated for a one-foot fall height.

UV Stabilized for Outdoor Use

AquaTiles products will retain their slip resistance over time, along with cushioning and color integrity, even after years of exposure to intense UV rays.

Chemical Resistant – Easy to Clean Aquatic Flooring

Aqua Tile is engineered to withstand exposure to chemical shock periods without compromising slip resistance, cushioning, or color integrity. This same technology allows for easy cleanability.

Installation of AquaTiles

Glue-down installation is required. Recommended adhesives are Powerhold 500 or Parabond M-250. Review instructions for the chosen adhesive.

Prepare substrate by grinding concrete to increase the bondable surface area for the adhesive to grip onto. Patch any damaged areas, cracks, or expansion joints. Remove dust from substrate and ensure that the substrate is completely dry.

Determine the best grid orientation and layout for your parallel and stagger directions. Parallel rows should be perpendicular to primary entrances or longest sight lines. Mark parallel grid lines every 2 feet with a chalk line. The 12-inch off-set stagger can be established with the first tile being placed at the 12-inch off-set position.

Use brushes or rollers to apply adhesive to the substrate and the back of the tiles with a consistent pattern. Ensure there is 100% coverage of the adhesive. Tiles should be rolled within 30 minutes of being installed to maximize the bond of the adhesive and remove air pockets.

AquaTile Test Data

Critical Fall Height Rating: ASTM F1292 – 1 ft
Surface Frictional Properties: ASTM E303 – greater than 40
Flammability: ASTM E648 – Class 1

Maintenance

Product can be damp mopped with common household floor cleaners. Avoid bleach.

Shipping

Ships via ground service, and may ship via freight delivery for larger orders on a pallet.