Walk in the Park Peel and Stick Carpet Tiles 3/4 Inch x 18×18 Inches 10 Per Carton

1. Peel and Stick
2. Stain and soil resistant
3. Half inch pile height
4. 34 ounce face weight
5. Residential Carpet Tiles
6. Easy DIY install
7. High Density Polyurethane foam backing
8. Made in the USA

The padded carpet squares go nicely over a firm subfloor, such as concrete in a basement or a hard vinyl floor in a bedroom. Each tile has 1/4 inches of padding on the underside, which adds a bit of cushioning for exercise or for sitting on the floor and playing with kids or pets.

Easy-to-Install Carpet Squares

Clean the subfloor before applying the peel and stick carpet tiles with pad. Remove dust and dry debris that could affect the ability of the adhesive to make a secure contact with the subfloor. If you mop the subfloor, allow it to completely dry before beginning the installation.

When preparing to lay out the tiles, the manufacturer recommends placing these tiles in a dry lay layout before removing the protective backing. Using the dry lay first makes it easier to figure out where you may need to make cuts to go around stationary objects or to fit tight to the wall before exposing the adhesive.

Use a utility knife and a straight edge to create a clean cut on the tiles. After making the cuts, the installer then can begin attaching the tiles to the subfloor.

Remove the protective backing from the tile to expose the adhesive. Because the manufacturer applies the glue to the backing at the factory, installers do not have to worry about making a mess by applying adhesive themselves during the install process.

Self Adhesive Residential Carpet Squares Specifications

• Width: 1.5 feet
• Length: 1.5 feet
• Total thickness: 3/4 inches
• Face Weight: 34 oz.
• Padding thickness: 1/4 inches
• Pile height: 1/2 inches
• Coverage per tile: 2.25 square feet
• Weight per tile: 1.5 pounds
• Pieces per carton: 10
• Coverage per carton: 22.5 square feet

Maintenance and Care

Everyone will appreciate our peel and stick carpet tiles, because they are easy to clean and maintain. In fact, customers are able to take care of our carpeted squares in the same way they’d care for other types of carpeting.

To perform the most basic cleaning process, start by vacuuming the tiles on a regular basis, just like any other carpeted floor. These self-stick carpet tiles have a high level of durability, so they will stand up to regular vacuuming.

For a more thorough cleaning process, customers can perform a DIY job with a carpet cleaning machine. It is best not to overexpose the carpeting to water, but the water resistant backing on the carpet will prevent small amounts of water from leaking onto the subfloor.

Should someone spill liquids on the flooring, customers should clean them immediately. Use a cloth rag and clean water to remove the spill.

Because of the peel and stick backing, customers have the ability to pull up a single tile that has excess soil and clean it separately from the rest of the layout. They could even replace it with a new tile if the old tile will not come as clean as they would like.

Maintenance

Vacuum regularly, spot and stain removal as needed. Deep clean periodically with hot water extraction.

Shipping

Ships via ground delivery, larger orders may ship via freight.