Rubber Tile Interlocks with Borders 10% Color Custom 1/4 Inch x 25×25 Inches Pacific

1. Variety of 10% color fleck options
2. Each tile comes with 2 border strips for a finished edge
3. Slip resistant surface provides traction
4. Interlocking edges for easy installation
5. No adhesive is required for installation
6. Order minimum is 400 sq ft per color
7. Mold and mildew resistant interlocking tiles
8. Made in California with recycled rubber

NOTE: This item is a custom order and is not returnable.

Perks of Home Gym and Exercise Room Flooring

Rubber flooring is a very durable material compared to foam flooring for home gyms. Rubber tiles do not indent under the weight of exercise equipment.

Rubber provides some ergonomic relief versus hard flooring but is not soft. Interlocking rubber tiles provide traction while exercising to help prevent slips and falls.

The banging of hand weights and exercise machines can be excessive, but rubber floors put a damper on some of this noise.

This interlocking rubber gym tile is made in the USA with recycled rubber material which keeps tires out of the landfill.

10% Color Flecks for a Pop of Color

These Pacific interlocking rubber tiles have a variety of 10% color fleck options for a pop of color to match any aesthetic in your home gym. These colors include Beige, Brown, Charcoal, Chrome, Cream, Gold, Orange, Purple, Spa, Teal, and Yellow.

Installation of Interlocking Rubber Tiles with Borders

To install these rubber tiles, just line up the edges of the interlocking puzzle tiles and push them together. You can use a rubber mallet to quicken the process. Each tile has two border pieces that can be removed for the tiles in the center of the installation. Use the borders to create finished edges for island installations.

If you plan to install rubber tiles wall-to-wall and will need to cut the tiles to fit the room, consider purchasing rubber tiles without borders as this will reduce the excess material.

Test Data:

Density – ASTM E96 – 68.3lbs/cubic feet
Tensile Strength – ASTM D412 – 2665 psi
Tear Resistance – ASTM D413 – Average elongation at break 1.52
Hardness – D2240 – Shore A 65 +/- 5
Slip Resistance – D C1028 – Coefficient of Friction .084-.090
Abrasion – D4060 – 2,000 cycles taber abraser 1kg, 0.329g – 0.35g loss
Flammability – ASTM E648 – Critical Radiant Flux <0.10W/cm2
Chemicals – N/A – Resistant to most acids and chlorine
Volatile Organic Compounds – CDPH v1.2 – <.05mg/m3

Compliant with the performance standards established for low-emitting flooring under the Collaborative for High Performance Schools (CHPS) and the LEED Pilot Credit 21: Low-Emitting Interiors programs.

Please Note: Special Order Colors

The following colors are special order and have a lead time of a minimum of 10 to 12 days. Please call to order. Special order colors: Yellow, Purple, Gold, Beige, Brown, Charcoal, Chrome, Cream, Orange, Spa and Teal

This product has a minimum of 400 square feet per color per order.

Maintenance

Clean with a damp mop and let dry. Always use a neutral pH cleaner on rubber flooring.

Shipping

Larger orders ship via freight delivery shrink wrapped on pallets. Smaller orders ship ground delivery.