Rolled Rubber Pacific 1/2 Inch 10% Color CrossTrain Custom Per SF

1. Shock and sound absorbent
2. Made in the USA, MAS Certified Green
3. Easy to install and maintain
4. Mold and mildew resistant
5. Great for rubber gym flooring
6. Unique design makes for a seamless floor surface
7. Excellent traction, even when wet
8. Order minimum is 800 sq ft

NOTE: This item is a custom order and is not returnable.

Rolled rubber specified cut lengths are available upon request. In some cases, some manufacturers may provide the length within two rolls. For example, a 45 linear foot run lay consist on two pieces, one at 20 and one at 25 linear feet. Butt seams are common in a rolled rubber flooring layout.

Roller rubber flooring Pacific is easy to install and is extremely durable. Even better, it’s a green building product that can help architects and builders achieve LEED Points.

Materials Recycled SBR tire rubber, dynamically bound

Colors
These tiles are available in custom 10% color fleck options. This product has a minimum of 800 square feet per order. Please call to order.
Custom colors are available over 20% fleck.

Size – 4 ft wide x 1/2 inch thickness
Tolerances – Certified top height to +/- .010
Installation – Full-spread glue down
Maintenance – Damp mop and let dry
Warranty -5 years materials and workmanship (pro-rated basis)
Density – ASTM D3676 68.3 lbs/cubic foot
Hardness -ASTM D2240 Shore A60 +/-5
Slip Resistance – ASTM D C1028 Friction Coefficient .084-.090
Abrasion -ASTM D4060 2,000 cycles taber abraser 1kg, .329-.35g loss
Chemicals -Resistant to most acids and chlorine
VOCs/Formaldehyde

Compliant with the performance standards established for low-emitting flooring under the Collaborative for High Performance Schools (CHPS) and the LEED Pilot Credit 21: Low-Emitting Interiors programs.
LEED/GreenBuild

Several LEED points available

Effective August 2023, the color percentage for this item has changed from 20% to 10% color flecks.

Please Note: Cut lengths for rolled rubber products are provided as a courtesy at no additional cost to customers. In come cases, the manufacturer may provide a cut length within two pieces of material. In other cases, the manufacturer may send material that is over or under the specified footage. In all cases, the manufacturer is required to supply the overall amount of material per order. It is common for rolled rubber jobs to have butt seams or cut end seams within one roll or run. Rolls are ordered by the square foot.

Maintenance

Sweep or vacuum daily. Scrub with deck brush and neutral Ph cleaner. Remove solution with a wet/dry vacuum.

Shipping

Shrink wrapped on pallets and shipped via freight delivery.