Horse Stall Mat Classic Interlocking 3/4 Inch x 10×10 Ft. Kit

1. Flat top surface for easy cleaning
2. 100% recycled vulcanized rubber
3. Pre-fitted for easy installation
4. Non-porous, odor and bacteria resistant
5. Tear and crack proof
6. Comfort for large animals standing on the mat
7. Slip resistant rubber
8. Measures 9 feet 10 inches x 9 feet 10 inches after installation

NOTE: This item is a custom order and is not returnable.

Two (2): 5×3 Ft. interlocking mats, one (1) corner left mat with two straight edges and two interlocking edges and one (1) corner right mat with two straight edges and two interlocking edges.

Once the entire horse stall mat kit is installed, the 10×10 rubber mat kit is 9 feet 10 inches x 9 feet 10 inches. This is because each tile loses some coverage due to its interlocks.

The 10×10 horse stall kit has many outstanding features:
Slip resistant providing better traction, wet or dry
Anti-fatigue comfort for animals and people
Noise and vibration absorption
Crack and tear proof
Non-porous helps prevent bacteria and odor from urine
Flat top and bottom, making the mats easy to clean, can be turned over if needed

Test Data:
Shore Hardness: ASTM 2240 – 65
Compression Set: ASTM D395 – 8.49%
Taber Abrasion: ASTM C501 – .1725 mg/cycle at 1000 cycles, .1442 mg/cycle at 2000 cycles
Tensile Strength: ASTM D412 – 321 psi
Elongation at Break: ASTM D412 – 180%
Tear Resistance: ASTM D624 – 122.5 lbs/in.
Moisture Absorption: ASTM D570 – .13%
Coefficient of Friction: ASTM C1028 – Dry=1.25, Wet=1.01
Critical Radiant Flux: ASTM E648-03 – .08 Watts/cm2

Maintenance

Sweep and/or hose off as needed. Can be cleaned using a damp mop with a PH neutral cleaner diluted with water. Ensure that any moisture is immediately extracted after cleaning.

Shipping

Ship via freight delivery, shrink wrapped on a pallet